calculate your age using this ishatools

AGE CALCULATER DAY MONTH YEAR You have been living for:

SHAKTHI AGE CALCULATOR

REMOVE WINDOWS 8.1 ENTERPRISE EVALUATION DESKTOP WATERMARK

using mcpwatermark editor is not good because it will removes windows branding image also .....so below procedure removes only watermarks without any problems

open this location in windows installation drive -->windows folder-->system 32 folder-->en-us folder copy below and replace original file with this

Need basebrd.dll.mui from C:\Windows\Branding\Basebrd\en-US

How to Remove watermark from Windows 8.1 Enterprise Evaluation

     How to Remove watermark from Windows 8.1 Enterprise Evaluation

 THIS article describes how to remove watermark on windows 8.1 desktop enterprise evaluation edition .after so many attempts this works well .this can only remove watermark doesn't extand any period .by using rearm process you can increase evaluation for another 90 days.....so you can use windows 8.1 enterprise edition with out any problems for six months.this is enough time to reinstall os.

Increase Your System's Virtual Memory for Large File Compares

Like all applications, UltraCompare uses your system's memory for faster access to data that needs to be accessible while you use the application. But what happens when UltraCompare uses its entire allotment of system memory? That's where virtual memory comes into play.

What is virtual memory, and why is it important?

Virtual memory is basically space on your hard drive that is allocated by your operating system to be used as a supplemental reserve of memory when your an application's RAM limit has been maxed out by that application.

DUAL BOOT WINDOWS 8.1/8/7 WITH KALI WIHTOUT USING ANY SOFTWARE

         This article is a step-by-step guide on how to dual-boot Windows 7 and Kali Linux on a single hard disk drive (HDD). Kali Linux is what used to be BackTrack Linux, a distribution designed for penetration testing and security professionals. It ships with about 300 penetration testing and hacking applications installed.

While BackTrack is based on Ubuntu, Kali Linux is based on Debian, and uses the complete Debian Installer. As a result, the installation process is different from that of BackTrack, which uses Ubuntu’s graphical

Allow A Program Through the Firewall [How-To do this?s]

Do you know how to block or allow a particular program through windows /linux firewall .then read below article..........thanks

           It seems like with most Windows 7 ready programs, during installation they are automatically granted access through the Windows Firewall.  Most of the time this is fine however I’ve ran into situations where some programs later might have issues accessing the internet. A great example of this is Remote Desktop, which by default is not allowed through Windows Firewall.  Additionally, being able to manually allow or block program through the Windows Firewall is a great trick for troubleshooting networking problems.

how to block any software or program from internet access

Use the Windows Firewall to Block a Program From Internet Access

          Have you ever installed a program that you only needed for offline use, but it insisted on trying to connect to the internet?here  we’re going to show you how to block them with it in Windows 7 and 8.

If you’re not sure which programs are accessing the internet, one easy way to find out is to open up Windows Resource Monitor. This can be done by searching for “resmon” in the start menu, or typing “resmon” into the Run Box (Windows Key + R). In this example I noticed that the Everything app had networking activity and I’m going to block it to make sure it doesn’t send any data away from my PC.

---------------------------

To get started we need to open up Windows Firewall. One quick way to do this is from the Control Panel. Just click the Windows Firewall icon

-----------------

.From the Firewall page click Advanced settings

----------------------

Here you can choose which you would like to block first: Inbound or Outbound. When it comes down to it I think blocking Outbound is usually enough for most applications. When Outbound connects are blocked, this means that the application can’t send any of your data to a remote server somewhere on the internet. Of course, if bandwidth is what you’re worried about you should probably block both. In any case, the process for blocking both is the same, so I’ll just cover one.

Click the New Rule… button.

-----------------

For the Rule Type select the “Program” bullet and click Next

------------------

Select the “This program path:” option and then either type in the path or use the browse button to find the executable of the application.

------------------

For the Action select the “Block the connection” option and click Next.

------------

For the Profile tab, select all of the available boxes: Domain, Private, and Public

----

You can name the firewall rule whatever you like. It’s a good idea to keep it something memorable or relevant though because you may want to change or disable it later on.

----------

Now the rule should be created and ready to go. However some applications also run as a service, so be sure to disable that as well if you can. Right click the newly created rule and select “Properties.”

---------From the properties window select the “Programs and Services” tab and then click the Settings button.

---------------

Here click to “Apply to this service” and then select the service that matches up with the program blocked by the rule. If you can’t find a matching service, chances are your program didn’t install a service along side it (so you can just cancel out).  Click OK to save change sand exit from both this and the properties window

-------

That’s all there is for creating an Outbound rule. Now if you want just repeat the process for an Inbound rule and the program will be completely blocked from internet access.

---------

If you want to temporarily give the application internet access again, you can disable the firewall rule by right-clicking on it within the Advanced Firewall Security window. If you want to permanently get rid of this blocking rule, just delete it

COMPLETELY HIDE A HARD DRIVE FROM MY COMPUTER

Do you have a lot of files that you need to keep hidden? Transfer your mass of data to a separate drive, and then completely hide that drive from prying eyes.

Various methods work for hiding content within a computer system. Classically, users have just created hidden folders and placed the files to be hidden there. However, navigating and unhiding complex folder structure can be difficult.

Alternatively, through this article users can just keep an entire drive hidden. This is a logical method for hiding large amounts of private or secret data. Basically, we will tell Windows 8 to disconnect the drive from the OS. The drive can physically still be connected to the machine, but nobody accessing the computer will be able to navigate to it.

Obviously, only do this will hard drives that do not contain part of the OS. Hiding a drive that contains essential Windows files will cause your installation to fail.

1.Right click on the Computer shortcut and click Manage. 

2.Select Storage under Computer Management. 

3.Now double-click on Disk Management. 

4.Select the drive that you want to hide. Right-click it and select Change Drive Letter and Paths… 

5.Click on the drive letter, then click remove. Confirm removal, then click OK. 

Your drive is now hidden. When browsing from the Computer shortcut, it will not be seen. When you need to access the data, repeat the procedure and add it back.

This, like all Windows hide techniques, is not completely secure. Parts of the OS that can detect the hard drive at the hardware level will show the drive to be present. However, most users looking for your data will not dive this deeply into your system looking for hidden devices.

How do I remove the Windows.old folder?

Do you know how to remove windows.old folder from your os drive ?lets see how to remove it from disk.
after upgrading present operating system to latest one ,old windows systems files are moved to windows.old folder an it is saved in latest os drive.if you want to remove directly it say "unable to delete these files permission denied "here is the process how to delete it? just read below article...

If you install Windows 7 by performing a custom installation and don't format the partition during the installation process, files that were used in your previous version of Windows are stored in the Windows.old folder. The type of files in this folder depends on your computer. After you’ve used Windows 7 for a while—for example, one or two weeks—and you’re confident that your files and settings are back to where you want them to be, you can safely reclaim disk space by using Disk Cleanup to delete the Windows.old folder.

Warning

• Before you use Disk Cleanup, make sure that all of your files and settings are in Windows 7 where you expect them to be. Deleting the Windows.old folder can’t be undone.

1. Open Disk Cleanup by clicking the Start button . In the search box, type Disk Cleanup, and then, in the list of results, click Disk Cleanup.
   If you're prompted to choose a drive, click the drive you just installed Windows on, and then click OK.
2. 
   
   
3. In the Disk Cleanup dialog box, on the Disk Cleanup tab, click Clean up system files.
   If you're again prompted to choose a drive, click the drive you just installed Windows on, and then click OK.
4. Select the Previous Windows installation(s) check box, and any other check boxes for the files you want to delete, and then click OK.
5. In the message that appears, click Delete Files.